Call Us 1-800-266-7798   |   Schedule a Demo

International Distributors

Resources / ICC

Refining and Chemicals Control System of the Future

42 min video  /  1 minute read Download Slides, PDFs, etc. (ZIP)
 

Speakers

placeholder

Donald Bailey

Senior Engineer

ExxonMobil Research and Engineering (EMRE)

In 2003, the ARC Advisory Group estimated that $65 billion worth of industrial control systems was nearing the end of its expected life. Motivated by this need, ExxonMobil has identified a set of functional characteristics of a next-generation industrial control system that improves manufacturing facility profitability and helps maintain competitiveness well into the 21st century.

Posted on October 1, 2015

You Might Also Like

article Guide  |  Data Center

NERC CIP Best Practices with Inductive Automation and Ignition

This guide addresses best practices for using Ignition and working with software vendors in a CIP-compliant way, with recommendations based on specific CIP standards.

Read the guide
customer project Oil and Gas

Ignition Makes Data from Multiple Sites Available in One Place

Gente Oil’s SCADA system is a centrally managed system of the oil process from extraction to transportation. The SCADA allows users to visualize and interact with the different instrumentation and actuators involved in the process.

5 min video

Watch the customer project
customer project Oil and Gas

Ignition Edge, Perspective, and MQTT for 1,000 Wells

The project was started to replace KODA Resources’ legacy poll/response SCADA system for an upstream oil & gas company. The existing servers were out of warranty and support. The solution was to develop an IIOT-ready SCADA system on virtual machines that would support MQTT and the company’s desire to use data to drive the business. The field is very diverse, with approximately 1,000 wells producing both oil and natural gas through a variety of different RTU/PLC platforms, and has been around since the 1950s.

5 min video

Watch the customer project
✕