Articles

Expand your knowledge with guides, industry articles, and white papers.

All Resources / Articles
article Guide

What Is MES?

Simply put, a MES system is used to monitor and manage work-in-process on the factory floor, covering resource scheduling, production workflows, recipe management, traceability, inventory, quality assurance, document control, and more. A successful implementation of MES software will not only improve efficiency, but make manufacturers into better businesses.

3 min read

Read the guide
article Guide  |  Data Center

NERC CIP Best Practices with Inductive Automation and Ignition

This guide addresses best practices for using Ignition and working with software vendors in a CIP-compliant way, with recommendations based on specific CIP standards.

1 min read

Read the guide
article Guide

Using Keycloak with Ignition

Keycloak is an open-source Identity and Access Management solution for adding authentication to applications or services. With Ignition, Keycloak functions as an Identity Provider to authenticate users and define roles to access client/session views.

10 min read

Read the guide
article Guide

Hosted/Multi-tenant Ignition Cloud Edition Guidance

Inductive Automation is proud to permit the licensing use of hosted and multi-tenant applications at no additional cost to the licensee when using Ignition Cloud Edition. Hosting enables flexible resource sharing and “pay as you go” service models. Multi-tenancy can enable the broad delivery of custom Ignition applications as a service. This change enables new service provider roles with the potential to benefit the greater Ignition community. However, these models inherently introduce risk to stakeholders.

13 min read

Read the guide
article Guide

What Is a Panel PC?

Most people are familiar with PCs (Personal Computers), but far fewer understand the difference between a retail PC and a panel PC. Whereas PCs are typically found in offices, panel PCs are specialized units designed to be used on or near machines in industrial environments like plant floors or remote sites. Panel PCs are built specifically to run HMI/SCADA software that allows operators to monitor and control processes in virtually every industry, including food & beverage, oil & gas, automotive, water & wastewater, and many more.

4 min read

Read the guide
article Guide  |  Pharmaceuticals

21 CFR Part 11 and Pharmaceutical Best Practices with Ignition

This guide addresses Food and Drug Administration (FDA) 21 CFR Part 11, Data Integrity and Good Automated Manufacturing Practices (GAMP). It provides best practices and guidelines supporting regulated Ignition applications in the life sciences and pharmaceutical industries.

1 min read

Read the guide
article Industry Article

Digital Transformation: Your Guide to Business Success

Digital Transformation is not just a buzzword or a passing fad businesses can afford to ignore. It’s the evolution of business.

12 min read

Read the industry article
article White Paper

What SCADA Systems Need in the Modern Era

Learn about the features you need to guarantee that a SCADA system is powerful and flexible enough to excel in the modern era.

10 min read

Read the white paper
article Guide

Ignition Server Sizing and Architecture Guide

This guide is intended to provide some tips to help you determine the correct architecture depending on your requirements. It is important to note that any architecture that you come up with needs to be fully tested and verified. Throughout that process you can observe the performance characteristics of the server in order to make any necessary adjustments to the architecture. There is no guarantee on performance since it is based on your design choices.

27 min read

Read the guide
article Guide

Ignition 8 Deployment Best Practices

Inductive Automation provides this helpful guide for deploying Ignition applications. The guide offers Ignition 8 best practices for setting up development and testing workflow.

30 min read

Read the guide
article Guide

PLC: Programmable Logic Controller

Learn Programmable Logic Controller (PLC) basics: what it is, what its functions are, how it operates, and its importance in the world of automation.

6 min read

Read the guide
article Industry Article  |  Water/Wastewater

3 Major Reasons Why Water Utilities Choose Ignition

Inductive Automation serves 600-plus water/wastewater facilities around the world and the number keeps growing. As more and more water utilities face the need to upgrade their current aging SCADA systems or install brand-new ones, we teamed up with Water & Wastes Digest to take a closer look at three of the biggest reasons why our customers choose Ignition for their projects.

8 min read

Read the industry article